Senior Electrical Engineer

JOB DESCRIPTIONAbout Technip EnergiesAt Technip Energies, we believe in a better tomorrow, and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do.If you share our determination to drive the transition to a low-carbon future, then this could be the job for you. We are currently seeking a Senior Electrical Engineer to join our team based in Kuala Lumpur, Malaysia.Successful candidates would be offered a fixed term of employment.About The JobPlay key roles on project execution and guide the team/peers to deliver excellent results.
Provide technical guidance and effective navigation to move the team forward. Knowledgeable to seek alignment and resolution when the need arises.
Approachable and effective collaboration skillsets. Work for team results.
Ability to coach and mentor new engineers.
Share constructive feedback for electrical engineering workflow/sequence.
Conducive to effort for development and progress of the department team.In the roles as Lead Engineer
Effective resource management of the team and ability to manage tasks efficiently with the team.
Work efficiently and effectively towards meeting the project milestones of man-hours, cost and project schedules.
Take leadership for Electrical discipline activities in multi-disciplinary projects.
Work closely with cross-functional departments (PMD/ECP/Procurement) for results.
Responsible for electrical engineering design activities on Onshore/Offshore project executions.Main Challenges
Well versed with technical parameters of various electrical equipment and good understanding of specifications and manufacturing processes of electrical equipment.
Ability to select proper equipment to meet project schedule and budgeted cost.
In-depth knowledge of electrical network design calculations and provide guidance to the team for system studies requirements.
Knowledge of theory, content and application of standards, codes and guidelines as applicable for onshore/offshore projects.
Awareness of man-hour and material cost estimates.
Resource management for efficient project execution.
Knowledge on various project phases: Conceptual, Pre-FEED, FEED, EPC, EPCM, PMC, Detailed Engineering related to Onshore/Offshore Oil-Gas/Petrochemical projects.Main AccountabilitiesDESIGN BASIS, CODE & STANDARD
Understanding and applying knowledge of International Codes and Standards, Industrial Standards and Practices as applicable, and interpretation and application of the requirement to meet project requirements.
Understanding and applying knowledge of Local Codes and Standards, identify discrepancies with any international standards, competent to resolve problems/troubleshoot based on Codes & Standards interpretation.
Understand limitation of Codes and Standards, knowledge of Local laws and applicable regulatory requirements and apply with accuracy and effectiveness.
In-depth understanding of Clients specification (e.g. PTS, DEP etc.) and provide service which meets contract requirements.
Review and raise clarifications on the Contractual documents / ITB (Invitation to Bid) in case of ambiguity in definition / lack of clarity / lack of reference/ areas of doubt etc. based on experience/judgment.KNOWLEDGE OF ELECTRICAL ENGINEERING ACTIVITIES
Competent to review Specifications and Data Sheets, Piping & Instrumentation Diagrams (P&IDs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings and other relevant documents.
Prepare the design basis, single line-diagrams, equipment and cable sizing calculations and other material and equipment analysis for client approval.
Guide engineers in the preparation of equipment and material specifications and data sheets.
Competent to participate effectively in the development of detailed engineering calculations and drawings including the preparation of Load list/schedule, Single Line Diagrams, Schematic Diagrams, Logic Diagrams, Cable Schedules and Cable Drum Schedules, Interconnection Schedules, Equipment Layouts, Cable Routing and Layout Drawings, Cable Trench/Tray Layout Drawings, Lighting System Layout and Details, Earthing/Lightning System Layout and Details, Heat Tracing Layout and Details, Installation Standard Drawings, Protection Drawings and other required documents.
Competent to perform/review and analyze the results of Load flow, short circuit, voltage dips and transient stability studies, relay coordination and design calculations for lighting, earthing and lightning protection etc. Ability to solve the problems and recommend the way forward.
Prepare Inquiry Requisitions to vendors, participate in the technical evaluation of vendor bid offers. Competent to review Vendors various options (including limitation and/or deviation) and provide Technical Bid Evaluations (TBE). Review vendor drawings and documents. Ensure vendor equipment specifications meet client equipment specifications and are within budgeted costs.
Prepare Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled timeframes and budgeted costs.
Review plot plans, organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks (IDCs) coordinate with other engineering disciplines in the integration of technical data inputs.
Competent to witness vendor FAT/shop testing, inspect vendor works and workshops when required, provide dispatch clearance and test certificates.
Competent to participate effectively to resolve any issues related to equipment testing in case of failures/deficiencies/under-performance/discrepancy during shop testing.
Participate in ELSOR/HAZOP meeting with the client and representatives of other engineering disciplines and close out of any action points.
Competent to interface and provide clarification, guidance and technical support to construction sites and commissioning engineers. Provide startup assistance as required.
Competent to explore cost-saving options/energy efficient measures during project execution phase or during proposal, if requested, and if available.
Perform related duties as and when directed by Direct Supervisor.WORKING DELIVERABLES
Ability to prepare or guide the team to prepare effectively in a timely and productive manner.
Calculation Spreadsheets, study and design reports.
Job specification / Equipment specification, Technical Data Sheet.
Material Requisition (MR/SR), Technical Clarification.
Technical Bid Evaluation / Tabulation (TBE/TBT).
Logic and Schematic diagrams.
Special study reports (e.g. Voltage selection, motor selection, VSD application, EMC, root-cause analysis etc.).
Sizing and selection of Hazardous Area Equipment.
Input to other disciplines deliverables such as layout and utility requirements.
Weight data and foundation loading input.
Equipment interface details.VENDOR DATA REVIEW (VDR)
Expert review on Vendor documents to meet Codes and Standards, Local Regulations, project and disciplines requirements.
Competent to interface with other disciplines like piping group, process, civil, structural and instrumentation.
Able to understand interface issues with other disciplines, and resolve any conflict.
Able to conduct VDR meeting with vendor/support Vendor in case of needs to shorten the VDR duration and to achieve project progress.EQUIPMENT MANUFACTURING KNOWLEDGE
Understand manufacturing process, long lead components, critical specifications of equipment, critical element/critical path and how its influence the delivery of equipment.
Able to anticipate effectively to improve delivery schedule of Vendor equipment.PERFORM AS LEAD ENGINEER ROLE
In the role as a Lead Engineer, able to provide total commitment to meet project values, monitoring of progress to achieve delivery schedule and execute within appropriate budget/resources.
Ability to anticipate, escalate and communicate effectively in time.
To provide pro-activeness, creativity and efficiency in project execution.
Coordinate and plan resources for execution of project.
Participate in the review of contract requirements for project execution, identify and resolve discrepancies and divergences from original proposal, FEED etc, identify requirements and scope of work, plan and prepare the Technical document deliverable list, man-hour estimation and project schedules etc. Ability to identify the scope of work in various phases of projects like conceptual, pre-FEED, FEED, EPC, EPCM, PMC and accordingly plan and schedule the man hours.
Advise Head of Department on the manpower and skill levels required, to ensure smooth execution of the project.
Distribute and assign work to the project team appropriately, to meet the project schedule.
Overall manage the development of detailed engineering calculations and drawings. Ensure the lesson learnt from past projects are discussed and applied as required.
Conduct regular team meetings to discuss about project progress, priorities and issues. Ability to resolve issues and recommend the way forward to meet project requirement and schedule adhering to the intended quality.
Ensure proper communication and coordination among the team members.
Establish project filing system and ensure adherence to project requirements and department standards.
Liaise with other departments/disciplines, clients and third parties as required by the projects.
Be overall responsible for the quality of work produced.
Produce the discipline close-out report once the project completed.
Act as the discipline Project Engineer to ensure the project executed within the specified schedules and budget.TECHNICAL AUDITS
Ability to carry out technical audits at the Head of Department request (For Senior Engineer more than 10 years experience).
Able to effectively investigate and resolve any quality complaints or incidents raised by any interested parties, or when requested by Client, or project manager.OTHERS
Good professional judgment, pro-active and take lead in execution of deliverables to meet project needs, and ability to handle difficult situations arise due to complexities of Project demand.
Deliver quality engineering deliverables/service and meeting JV/Client expectations.
Fulfill QA/QHSES aspects, with acceptable teamwork.About You
The Candidate shall possess a Bachelor's Degree in Electrical Engineering accredited by Board of Engineer Malaysia or approved equivalent.
For Senior Engineer, possess at least minimum 8 years of electrical engineering design experience in onshore/offshore applications.
For Lead Engineer, possess at least minimum 12 years of post-graduate experience in the similar electrical engineering design experiences for onshore/offshore applications.
Preferably registered Professional Engineer (PE) with local board or approved equivalent. Professional Engineer with Practicing Certificate (PEPC) will be advantageous for Lead Engineering position.Additional Information
Be willing to travel and stationed at various Engineering Operating Centers / Client Office on needs basis (for overseas assignment).
Site or experience with OEM (1 to 2 years).
Exhibit and maintain good relationship with Client / Peers / Equipment Vendor & suppliers.
Good Professional Check (feedback) from past Employers / Clients.What's next?Starting Date: ImmediateOnce receiving your application, a recruiter performs an initial check and a review is further carried by hiring manager. We expect to take up to a few weeks to perform that review. If you hear from us, it is because we want to organize interviews and meet with you physically, or virtually, depending upon the location. To get an overview of the recruitment process, visit our dedicated webpage here.We invite you to get to know more about our company by visitingwww.ten.comand follow us on LinkedIn, Instagram for company updates.#LI-MK1
#J-18808-Ljbffr